Baby Stuff Lab compares top-rated RC Servo Arms for Gas by analyzing reviews and customer feedback. You can easily choose the right one from our Editor Pick List.

Top Rated RC Servo Arms for Gas

No. 1
Hobbypark 25pcs Adjustable Pushrod Connector Linkage Stoppers D1.3mm RC Airplane Plane Parts
  • Diameter of the Hole:1.3mm Compatible with Pushrods 1.0 / 1.1 / 1.2 / 1.3mm
  • Net Weight:Approx 0.7g/pc
  • Pack of 25pcs Push Connectors +1 Piece hex wrench
No. 2
2Pack SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with...
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
  • Support for Arduino,Futaba, JR, Sanwa and Hitec remote system.
No. 3
BETU 2Pack 25KG High Torque RC Servo,Waterproof servo Compatible with 1/6,1/8, 1/10, 1/12 RC Car, Full Metal Gear Steering Servo with 25T Servo...
  • 2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.
  • Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.
  • The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).
  • Waterproof servo, Full metal gear, Less noise, light weight, Running degree 270°
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment.
No. 4
ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY,RC car (Control Angle...
  • DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
  • High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life
  • Copper & Aluminum / Stainless Steel & Aluminum
  • High performance digital standard servo,High-precision metal gears (Stainless steel gear)with hard anodizing
  • CNC aluminium middle Shell,Dual ball bearings
No. 5
Apex RC Products 25T for Futaba Blue Aluminum Dual Clamping Servo Horn - 2 Pack #8014
  • Includes 2 (Two) Servo Horns
  • Futaba / Savox Aluminum Clamping Servo Horn
  • 25 Tooth Spline
  • 2 Mounting Positions - 20mm & 24mm (Measured From Hole Center To Hole Center)
  • High Quality CNC Machined Aluminum
Save $11.00No. 6
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Running angle: 180 degree
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 ms
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V~6.0V
  • Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
No. 7
INJORA RC Servo Arm Upgrade Mini Servo Arm Accessory for ES08MA II Servo Upgrade Parts, 2Pcs (Black&Red)
  • Come with some screws, easy to install
  • Etched with the INJORA logo, look more attractive
  • Sold two per package and available in four colors
  • Made of aluminum alloy for incredible precision, rigidity and durability
  • This is a replacement scx24 stock servo horn, intended for use with ES08MAII 12g analog servo
Save $1.50No. 8
uxcell 10 PCS M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter
  • FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut)
No. 9
FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8...
  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life.
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard...
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering...
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and...
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20X43mm.
Save $1.01No. 10
4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter
  • Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
  • This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees
  • Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
  • This servo offers a full range of 180° with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.

Last update on 2022-10-06


Harrison

Harrison loves kids. He knows baby gear backward and forward. BabyStuffLab is one of his favorite platforms to share his experience and consulting results with parents.

Leave a Comment

*

Recent Posts

10 Best Dollhouse Furniture under $50

Baby Stuff Lab compares top-rated Dollhouse Furniture under $50 by analyzing reviews and customer feedback.…

4 weeks ago

10 Best Dollhouse Furniture under $30

Baby Stuff Lab compares top-rated Dollhouse Furniture under $30 by analyzing reviews and customer feedback.…

4 weeks ago

10 Best Dollhouse Furniture under $20

Baby Stuff Lab compares top-rated Dollhouse Furniture under $20 by analyzing reviews and customer feedback.…

4 weeks ago

10 Best Dollhouse Furniture under $15

Baby Stuff Lab compares top-rated Dollhouse Furniture under $15 by analyzing reviews and customer feedback.…

4 weeks ago

10 Best Dollhouse Décor under $20

Baby Stuff Lab compares top-rated Dollhouse Décor under $20 by analyzing reviews and customer feedback.…

4 weeks ago

10 Best Dollhouse Décor under $15

Baby Stuff Lab compares top-rated Dollhouse Décor under $15 by analyzing reviews and customer feedback.…

4 weeks ago